Application: | Construction, Overhead, Underground, Industrial, Power Station |
---|---|
Voltage: | Low, Medium, High Voltage |
Current: | AC Cable |
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
AHXAMK-W 19/33 (36) kV 3-core HD 620 10 F, SFS 5636 3x95+35 Cu Medium Voltage Power Cable
Standard:
IEC60502, BS6346, VDE, AS/NZS, UL, etc
The Rated Voltage(kv):
1st class 0.6/1 1.8/3 3.6/6 6/10 8.7/15 12/20 18/30 21/35
2nd class 1/1 3/3 6/6 8.7/10 12/15 18/20 - 26/35
Application:
XLPE insulated power cable has a number of advantages compared with paper insulated and PVC insulated cables. XLPE cable has high electric property, mechanical property, heat aging performance, environmental stress crack resistance, chemical corrosion resistance, and it also has simple structure, convenient operation and it is not restricted by laying in large difference of level. It can be applied in high temperature of 90 degree for a long time.
PVC insulated power cable is suitable for laying fixed in power transmission and distribution lines with A.C. 50HZ and rated voltage of 0.6/1kV.
TYPE |
NAME |
Main Application |
|
CU core |
AL core |
||
YJV/YJY |
YJLV/YJLY |
XLPE insulated,PVC/PE sheathed power cable |
For laying indoor ,tunnel,canal and underground. |
YJV22/YJV23 |
YJLV22/YJLV23 |
XLPE insulated,steel tape armored, |
For laying indoor ,tunnel,canal and underground. |
YJV32/YJV33 |
YJLV32/YJLV33 |
XLPE insulated,thin steel wire armored, |
For laying in shaft,water underground will large difference of level. |
YJV42/YJV43 |
YJLV42/YJLV43 |
XLPE insulated,thick steel wire armored, |
For laying in water and seabed. |
Number of cores:
1core 2core 3core 3+1core 4core 4+1core 4+2core 5core and so on.
Nominal Section
Area(mm2) :1.5 2.5 4 6 10 16 25 35 50 70 95 120 150 185 240 300 400 500 630 800
Features:
1). XLPE insulated power cable not only has excellent electric, mechanical properties, but also has powerful resistance against chemical erosion, heat-aging and environmental stress.
2) .Its structures are simple. The long term operating temperature is +90 degrees. It is convenient to use and can be laid with no restriction of different level.
3). Our XLPE cables can be produced according to our specification which is equivalent to IEC 502-1983, and its some indexes are superior to 502-1983.
4). We can design and manufacture special XLPE cable according to the other standards required by the customers.
5).Application: for laying indoor, tunnel, canal and underground.
Specification
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Alum Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
1x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 10.9 |
1x6 | 2.8 | 0.7 | 1 | 0.8 | 1.8 | 11.4 |
1x10 | 3.6 | 0.7 | 1 | 0.8 | 1.8 | 12.2 |
1x16 | 4.5 | 0.7 | 1 | 0.8 | 1.8 | 13.1 |
1x25 | 5.6 | 0.9 | 1 | 0.8 | 1.8 | 14.6 |
1x35 | 6.7 | 0.9 | 1 | 1.25 | 1.8 | 16.6 |
1x50 | 8 | 1 | 1 | 1.25 | 1.8 | 18.1 |
1x70 | 9.4 | 1.1 | 1 | 1.25 | 1.8 | 19.7 |
1x95 | 11 | 1.1 | 1 | 1.6 | 1.8 | 22 |
1x120 | 12.4 | 1.2 | 1 | 1.6 | 1.8 | 23.6 |
1x150 | 13.8 | 1.4 | 1 | 1.6 | 1.8 | 25.4 |
1x185 | 15.3 | 1.6 | 1 | 1.6 | 1.8 | 27.4 |
1x240 | 17.5 | 1.7 | 1 | 1.6 | 1.9 | 29.9 |
1x300 | 19.5 | 1.8 | 1 | 2 | 2 | 33.1 |
1x400 | 22.6 | 2 | 1.2 | 2 | 2.2 | 37.3 |
1x500 | 25.2 | 2.2 | 1.2 | 2 | 2.3 | 40.5 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
2x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 12.8 |
2x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 13.6 |
2x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 14.6 |
2x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 16.5 |
2x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.1 |
2x16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 19.9 |
2x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 23.6 |
2x35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 25.8 |
2x50 | 8 | 1 | 1 | 1.6 | 1.9 | 29 |
2x70 | 9.4 | 1.1 | 1 | 2 | 2 .3 | 3.2 |
2x95 | 11 | 1.1 | 1.2 | 2.1 | 3 | 7.1 |
2x120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 40.5 |
2x150 | 13.8 | 1.4 | 1.2 | 2.5 | 2.4 | 45.4 |
2x185 | 15.3 | 1.6 | 1.4 | 2.5 | 20.6 | 49.9 |
2x240 | 17.5 | 1.7 | 1.4 | 2.5 | 20.7 | 55.1 |
2x300 | 19.5 | 1.8 | 1.6 | 2.5 | 20.9 | 60.2 |
2x400 | 22.6 | 2 | 1.6 | 2.5 | 30.1 | 67.7 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
3x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 13.2 |
3x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.1 |
3x4 | 2.3 | 0.7 | 1 | 0.8 | 1.8 | 15.2 |
3x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 17.1 |
3x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 18.9 |
3x16 | 4.5 | 0.7 | 1 | 1.25 | 1.8 | 20.8 |
3x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 24.7 |
3x35 | 6.7 | 0.9 | 1 | 1.6 | 1.8 | 27.2 |
3x50 | 8 | 1 | 1 | 1.6 | 1.9 | 30.6 |
3x70 | 9.4 | 1.1 | 1 | 2 | 2.1 | 35.2 |
3x95 | 11 | 1.1 | 1.2 | 2 | 2.2 | 39.3 |
3x120 | 12.4 | 1.2 | 1.2 | 2 | 2.3 | 43 |
3x150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.5 | 48.6 |
3x185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.7 | 53 |
3x240 | 17.5 | 1.7 | 1.4 | 2.5 | 2.8 | 58.5 |
3x300 | 19.5 | 1.8 | 1.6 | 2.5 | 3 | 64 |
3x400 | 22.6 | 2 | 1.6 | 3.15 | 3.3 | 73.5 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
||
mm² | mm | mm | mm | mm | mm | mm | mm | mm |
3x 16/10 | 4.5 | 3.6 | 0.7 | 0.7 | 1 | 1.6 | 1.8 | 22.7 |
3x 25/16 | 5.6 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.8 | 26.5 |
3x 35/16 | 6.7 | 4.5 | 0.9 | 0.7 | 1 | 1.6 | 1.9 | 29 |
3x 50/25 | 8 | 5.6 | 1 | 0.9 | 1 | 1.6 | 2.1 | 33 |
3x 70/35 | 9.4 | 6.7 | 1.1 | 0.9 | 1.2 | 2 | 2.2 | 38 |
3x 95/50 | 11 | 8 | 1.1 | 1 | 1.2 | 2 | 2.3 | 42.4 |
3x120/70 | 12.4 | 9.4 | 1.2 | 1.1 | 1.2 | 2 | 2.5 | 48 |
3x150/70 | 13.8 | 9.4 | 1.4 | 1.1 | 1.4 | 2.5 | 2.7 | 52 |
3x185/95 | 15.3 | 11 | 1.6 | 1.1 | 1.4 | 2.5 | 2.8 | 57.2 |
3x240/120 | 17.5 | 12.4 | 1.7 | 1.2 | 1.6 | 2.5 | 3.1 | 64 |
3x300/150 | 19.5 | 13.8 | 1.8 | 1.4 | 1.6 | 2.5 | 3.2 | 69.8 |
Nominal Cross Section |
Diameter of Conductor (Approx.) |
Nominal Insulation thickness |
Nominal Inner Covering thickness |
Nominal Steel Wire dia. |
Nominal Sheath thickness |
Overall Diameter (Approx.) |
mm² | mm | mm | mm | mm | mm | mm |
4x1.5 | 1.4 | 0.7 | 1 | 0.8 | 1.8 | 14 |
4x2.5 | 1.8 | 0.7 | 1 | 0.8 | 1.8 | 14.9 |
4x4 | 2.3 | 0.7 | 1 | 1.25 | 1.8 | 17 |
4x6 | 2.8 | 0.7 | 1 | 1.25 | 1.8 | 18.2 |
4x10 | 3.6 | 0.7 | 1 | 1.25 | 1.8 | 20.2 |
4x16 | 4.5 | 0.7 | 1 | 1.6 | 1.8 | 23 |
4x25 | 5.6 | 0.9 | 1 | 1.6 | 1.8 | 26.7 |
4x35 | 6.7 | 0.9 | 1 | 1.6 | 1.9 | 29.5 |
4x50 | 8 | 1 | 1 | 2 | 2.1 | 34.2 |
4x70 | 9.4 | 1.1 | 1.2 | 2 | 2.2 | 38.8 |
4x95 | 11 | 1.1 | 1.2 | 2 | 2.3 | 42.9 |
4x120 | 12.4 | 1.2 | 1.4 | 2.5 | 2.5 | 48.6 |
4x150 | 13.8 | 1.4 | 1.4 | 2.5 | 2.7 | 53.2 |
4x185 | 15.3 | 1.6 | 1.4 | 2.5 | 2.8 | 58.1 |
4x240 | 17.5 | 1.7 | 1.6 | 2.5 | 3.1 | 64.8 |
4x300 | 19.5 | 1.8 | 1.6 | 2.5 | 3.2 | 70.4 |
4x400 | 22.6 | 2 | 1.8 | 3.15 | 3.6 | 81.3 |
1). Rated Voltage, No. of Core and Range of Sectional Area
Rated voltage (kv) Sectional area (mm2) No. of core |
1st class | 0.6/1 | 1.8/3 | 3.6/6 | 6/10 | 8.7/15 | 12/20 | 18/30 | 21/35 |
2nd class | 1/1 | 3/3 | 6/6 | 8.7/10 | 12/15 | 18/20 | - | 26/35 | |
1 Core | 1.5-800 | 25-800 | 25-1200 | 25-1200 | 35-1200 | 50-1200 | 50-1200 | 50-1200 | |
2 Core | 1.5-185 | 25-185 | |||||||
3 Core | 1.5-400 | 25-400 | 25-400 | 25-400 | 35-400 | 50-400 | 50-400 | 50-400 | |
4 Core | 2.5-400 | 25-400 | |||||||
5 Core | 2.5-400 | 25-400 |
Nominal section area (mm2) | 1.5 | 2.5 | 4 | 6 | 10 | 16 | 25 | 35 | 50 | 70 | 95 | 120 | 150 | 185 | 240 | 300 | 400 | 500 | 630 | 800 |
Copper core | 12.1 | 7.41 | 4.61 | 3.08 | 1.83 | 1.15 | 0.727 | 0.524 | 0.387 | 0.268 | 0.193 | 0.153 | 0.124 | 0.099 | 0.0754 | 0.0601 | 0.047 | 0.0366 | 0.0283 | 0.0221 |
Aluminum core | 18.1 | 12.1 | 7.41 | 4.61 | 3.08 | 1.91 | 1.2 | 0.868 | 0.641 | 0.443 | 0.32 | 0.253 | 0.206 | 0.164 | 0.125 | 0.1 | 0.778 | 0.0605 | 0.0469 | 0.0367 |
Rate voltage Uo (kv) Item |
0.6/1 | 1.8/3 | 3.6/6 | 6/6 6/10 | 8.7/10 8.7/15 | 12/20 | 18/20 18/30 | 21/35 | 26/35 | |
Voltage | Test voltage | 3.5 | 6.5 | 12.5 | 21 | 30.5 | 42 | 63 | 73.5 | 91 |
Test time | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | 5 | |
Partial discharge test | Test voltage | - | - | 6.2 | 10.4 | 15.1 | 20.8 | 31.1 | 36.3 | 45 |
Discharge capacity | - | - | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Packaging
Packing Details : Packing in wooden drum, iron-wooden drum or as customer's requirement.
Delivery Details : 15-25 days after place an order.
About Us
Henan Kingyear Aluminum Industrial Co., Ltd was founded in 2006, located in Gongyi industry area of Henan Province. Our company consists of 3 main subsidiaries, business specialized in develop, manufacture and distribution of Aluminum products. Our factories zone occupies more than 1200,000 square meters and the employees' number has exceeded 200.
We, Kingyear, dedicate ourselves to be a manufacturer of providing comprehensive solutions and customized services to help our customer to solve their problems and improve their profit.
We have a professional sales team with each of them has engaged in this job for 10 years, so that we can provide the comprehensive and professional technology for you.
With the perfect quality and after sales service, till now we have exported to more than 80 countries, welcome to visit us and establish win-win business relationship!
Our Service:
1.10 years production experience and 10 years export experience .
2.Products certification :ISO,SGS,CE,BV
3.OEM service available based on official & legal authorization.
4.Strict quality control system.
5.Rapid delivery and feedback,Faster lead time than our competitors.
6.Excellent quality with reasonable price.
7.Strong technical support (technical data, drawing, etc.)
8.Professional teamwork service for you actively.
9.Stock available, Free sample is available.
FAQ
Q:I didn't find the product which I need in this page?
A:If you didn't find the species of the produxts you need, please contact us directly, we will reply you quickly.
Q:What's your minimum order quantity?
A:It is not so sure, you can confirm it with us. Normally, it will be 5 tons.
Q:What's your delivery time?
A:It depends on whether we just has the stock for your type.Normally,it takes about 7-15days to achieve production.
Q:How can I get a sample from your company? Is the sample free?
A:If you need the sample to check the quality, please contact us, we will send you the free sample, but the freight charge should be paid.
Q:What if the product which we need have some differences on specifications from yours?
A: Any difference, we can design and produce according to your requests, which include size, color, material, processing requirement etc.
Just leave your message if you are interested in our products,We will contact you very soon!